Trane filter sizes
Trane systems usually use one of two kinds of filter: a 1-inch filter in or next to the furnace, or a 5-inch media filter in a Perfect Fit or QuikBox cabinet. The 1-inch size depends on cabinet width and how the return is set up. A 5-inch media filter is matched to its cabinet by part number.
Does the model number settle it? Usually not. Trane says the filter size is chosen by the installer and "cannot be found in a manual" without looking at your system.[1] Its owner's guide also says filters aren't included with all furnaces.[2] Start with the filter you have. Use the tables to check it.
1-inch furnace filters by cabinet width
This is from Trane's owner's guide for indoor units (32-5064-WEB01). The guide gives sizes by cabinet width and filter setup, without listing furnace model numbers on these pages.
| Setup | 17-1/2 in. cabinet | 21 in. cabinet | 24-1/2 in. cabinet |
|---|---|---|---|
| Upflow, bottom return | 17 x 25 x 1 | 20 x 25 x 1 | 24 x 25 x 1 |
| Upflow, side return (left or right) | not stated | factory filter trimmed to 17 x 25 x 1 | factory filter trimmed to 17 x 25 x 1 |
| Upflow/horizontal installed horizontally (filter kit) | two 16 x 20 x 1 | two 16 x 20 x 1 | two 16 x 20 x 1 |
| Downflow/horizontal (filter kit) | two 14 x 20 x 1 | two 16 x 20 x 1 | two 16 x 20 x 1 |
Trane says replacement filters should be a high-velocity type, the same size as originally supplied.[2] It also notes that filters may sit outside the furnace entirely, in a side filter frame or behind a remote grille in a hallway, wall or ceiling, and that your dealer can tell you where.[2]
The guide is dated 2012 (PDF metadata) and doesn't say which furnace models these pages cover. Use it to cross-check your measurement, and don't buy a case of filters on this table alone.
5-inch media: Perfect Fit and QuikBox
A metal box about 5 inches deep between the return duct and the furnace or air handler is probably a Trane media cabinet. Trane's handbook (22-8301-36, effective 1/1/23) cross-references the newer QuikBox filters to older Perfect Fit cabinets and filter part numbers:
| Older filter part | Perfect Fit cabinet | QuikBox MERV 11 | QuikBox MERV 13 | Filter dimensions (in.) |
|---|---|---|---|---|
| BAYFTFR14M2 | TFM145B0FR0 | FLRQB5FR14M11 | FLRQB5FR14M13 | 13.7 x 26 x 4.7 |
| BAYFTFR17M2 | TFM175B0FR0 | FLRQB5FR17M11 | FLRQB5FR17M13 | 16.7 x 26 x 4.7 |
| BAYFTFR21M2 | TFM210B0FR0 | FLRQB5FR21M11 | FLRQB5FR21M13 | 20.2 x 26 x 4.7 |
| BAYFTFR24M2 | TFM245B0FR0 | FLRQB5FR24M11 | FLRQB5FR24M13 | 23.7 x 26 x 4.7 |
| BAYFTDN17M2 | TFM17DA0FR0 | FLRQB5DN17M11 | FLRQB5DN17M13 | 16.7 x 20 x 4.7 |
| BAYFTAH21M2 | TFM215B0AH0 | FLRQB5AH21M11 | FLRQB5AH21M13 | 20.7 x 20 x 4.7 |
| BAYFTAH23M2 | TFM235B0AH0 | FLRQB5AH23M11 | FLRQB5AH23M13 | 22.7 x 20 x 4.7 |
| BAYFTAH26M2 | TFM260B0AH0 | FLRQB5AH26M11 | FLRQB5AH26M13 | 25.2 x 20 x 4.7 |
Trane marks the QuikBox cabinet for the 14-inch size as obsolete, but still lists its replacement filters. Trane says QuikBox replacement filters are backward compatible with every TFM FilterBox.[3]
Honeywell Home (Resideo) replacements for Perfect Fit
Resideo makes aftermarket filters for Perfect Fit cabinets and publishes which Trane part each one replaces:
| Replaces Trane part | Resideo model | Nominal (in.) | Actual A x B (in.) |
|---|---|---|---|
| BAYFTFR14M | TRN1427T1 | 14-1/2 x 27 x 5 | 14.3 x 26.2 |
| BAYFTFR17M | TRN1727T1 | 17-1/2 x 27 x 5 | 17.3 x 26.2 |
| BAYFTFR21M | TRN2127T1 | 21 x 27 x 5 | 20.8 x 26.2 |
| BAYFTFR24M | TRN2427T1 | 24 x 27 x 5 | 24.3 x 26.2 |
| BAYFTAH21M | TRN2121T1 | 21-1/2 x 21 x 5 | 21.2 x 20.1 |
| BAYFTAH23M | TRN2321T1 | 23-1/2 x 21 x 5 | 23.3 x 20.1 |
| BAYFTAH26M | TRN2621T1 | 26 x 21 x 5 | 25.8 x 20.1 |
Resideo rates these at MERV 10 at 492 fpm under ASHRAE 52.2-1999.[4]
Why two different "actual" sizes? Trane lists the QuikBox filter for the 17-inch cabinet at 16.7 x 26 x 4.7. Resideo lists its own replacement at 17.3 x 26.2. These are different products built to fit the same cabinet, so don't shop for 5-inch media by measured size. Match the part number on your cabinet or old filter.
Arrow direction and where the label is
For grille and air-handler filters, Trane says the arrow faces into the wall, ceiling or air handler.[5] The serial label on a Trane furnace is on its right or left panel, and on an air cleaner it's on the back of the door.[6] See model and serial labels.
Last checked 2026-11-18 against the documents listed under Sources.
Sources
Every number above links to the document it came from. We re-open each one and record the date in our source log.
- Air Filters - HVAC Air Filters (FAQ: How do I find the right size air filter?), Trane (FAQ: How do I find the right size air filter?). Last checked 2026-11-18.
- Owner's Guide, Indoor Units: Air Handlers, Gas Furnaces (32-5064-WEB01), Trane (p. 7, Air Filters; pp. 7–8, Proper Maintenance – Gas Furnaces; p. 7; pp. 7–8). Last checked 2026-11-18.
- Trane product handbook section IAQ-3 (22-8301-36): QuikBox Media Cabinet and Filters, Trane (document hosted by Ferguson) (Tables IAQ-3-B, IAQ-3-C; IAQ-3, QuikBox features). Last checked 2026-11-18.
- Replacement Filter for Perfect Fit, Specification Data 68-3070-02 (Rev. 01-22), Resideo Technologies (Honeywell Home) (Table 1; Specifications). Last checked 2026-11-18.
- Air Handler Filter Location: Where Is It?, Trane (How to replace the HVAC air filter). Last checked 2026-11-18.
- Locating The Serial Numbers On Your New Products, Trane. Last checked 2026-11-18.