How to find your filter size
Most people expect the furnace model number to tell them the filter size. Usually it doesn't. The installer decides where the filter goes and what size it is, so the dependable answer is the filter, or the slot, in your own house.
Why the model number isn't enough: Trane says the right filter size "varies based on the unique installation in each home" and is picked by the installer, so it "cannot be found in a manual."[1] Carrier also says the installer puts the filter wherever it suits the home.[2] A manual can tell you which sizes a furnace was designed for. It can't tell you which one your installer used.
Step 1: Find the filter
The manufacturers list the same usual places:
- A slot or rack in the furnace or air handler cabinet, often at the bottom or side where return air comes in.[2][1]
- An external rack or cabinet on the side of the furnace.[2] A box several inches thick is usually a media cabinet. Carrier's optional media cabinet, for example, takes either a standard 1-inch filter or a 4-inch media filter.[3]
- A slot cut into the return duct next to the unit.[2]
- Behind a return-air grille in a wall or ceiling. Some homes have more than one.[1]
Safety: turn the system off at the thermostat before you open a panel. Trane's owner's guide says to disconnect power before removing a furnace's blower door.[4] Carrier says homeowners can clean and replace filters, and that other work should be left to trained service staff.[5]
Step 2: Read the frame
Pull the filter out and look at the edges. Trane notes most filters have the size printed on one or more sides, and that common sizes include 16 x 25 x 1, 20 x 20 x 1, 16 x 20 x 1 and 20 x 25 x 1.[6] If the old filter fit snugly, buy that same printed size.[6]
Write the size, and the direction the arrow pointed, on the cabinet with a marker. Next time it'll take ten seconds.
Step 3: No size printed? Measure
If the label is gone or there's no filter at all, measure the filter or the empty slot. Trane says to measure length, width and depth, then round to a standard size.[7] Our measuring guide covers this step by step, including why a "16 x 25 x 1" really measures smaller.
Step 4: Check the manufacturer's tables, if they exist
Some manuals list the filter sizes a cabinet was built for. They're helpful for checking your measurement, but they don't override it. For example:
- Carrier's 59SC2D furnace manual lists a different bottom-return filter for each casing width. It then adds that side-return filters may be a different size and tells you to measure the filter.[3] See our Carrier page.
- Trane's furnace owner's guide gives 1-inch sizes by cabinet width, but they change with the return setup. Some setups need the factory filter trimmed, and Trane notes filters aren't included with all furnaces.[4] See our Trane page.
To find your model number for these tables, see finding the model and serial label.
Step 5: Still unsure? Ask the installer
Trane's owner's guide calls the installing dealer "your best source" of filter information.[4] If the system is old and the installer is gone, an HVAC technician can confirm the size at a routine visit.
Two mistakes to avoid
- Don't measure the grille cover. Measure the filter, or the opening it sits in behind the grille.
- Don't force a filter that's "close enough." EPA says it should fit snugly without bending or crushing, or air leaks around it.[8]
Last checked 2026-11-18 against the documents listed under Sources.
Sources
Every number above links to the document it came from. We re-open each one and record the date in our source log.
- Air Filters - HVAC Air Filters (FAQ: How do I find the right size air filter?), Trane (FAQ: How do I find the right size air filter?; FAQ: Where is the air filter in my HVAC system?). Last checked 2026-11-18.
- Need Help With Air Filters, Carrier (Canada residential site). Last checked 2026-11-18.
- 59SC2D Single-Stage 4-Way Multipoise Condensing Gas Furnace, Installation, Start-up, Operating and Service and Maintenance Instructions (Catalog No. 59SC2D-04SI, edition 12/25), Carrier (p. 19, media filter cabinet; p. 20 Table 8; p. 21 Table 9 footnote). Last checked 2026-11-18.
- Owner's Guide, Indoor Units: Air Handlers, Gas Furnaces (32-5064-WEB01), Trane (p. 7, How to remove the filter from your Gas Furnace; pp. 7–8; p. 2, Air Handlers). Last checked 2026-11-18.
- EZXCAB High Efficiency Air Filtration System, Installation, Operation & Maintenance (Form IM-EZCB-01), Carrier (hosted by Carrier Enterprise / Watsco) (Safety Considerations). Last checked 2026-11-18.
- Furnace Filter Guide: Everything You Need to Know, Trane (What furnace filter size do I need?). Last checked 2026-11-18.
- Air Handler Filter Location: Where Is It?, Trane (How to get the right size filter). Last checked 2026-11-18.
- Guide to Air Cleaners in the Home, U.S. Environmental Protection Agency (Q&A: How can I tell if the filter is the right size?). Last checked 2026-11-18.