MERV 8 vs 11 vs 13: what the numbers mean
MERV is a test score for how well a filter catches particles of different sizes. Higher numbers catch more of the small stuff. The catch is that your system has to be able to push air through the filter, and that depends on the filter's size and depth as well as its MERV.
Short answer: EPA's advice for home HVAC filters is to use at least MERV 13, or the highest rating your system fan and filter slot can handle, and to ask an HVAC technician if you're not sure.[1] MERV 8 is the common basic pleated filter. MERV 11 sits in the middle. MERV 13 is the first level where the test requires the filter to catch at least half of the smallest particle range.[2]
What MERV measures
MERV stands for Minimum Efficiency Reporting Value. EPA describes it as a filter's ability to capture particles between 0.3 and 10 microns, with the rating coming from a test method developed by ASHRAE.[2] Carrier's filter literature names the standard: ASHRAE Standard 52.2.[3]
The test sorts particles into three size bands: 0.3–1.0, 1.0–3.0 and 3.0–10.0 microns. Each MERV level has a minimum average capture percentage it has to hit in each band.
MERV 8, 10, 11 and 13 side by side
| MERV | 0.3–1.0 µm | 1.0–3.0 µm | 3.0–10.0 µm |
|---|---|---|---|
| 8 | not rated in this band | ≥ 20% | ≥ 70% |
| 10 | not rated in this band | ≥ 50% | ≥ 80% |
| 11 | ≥ 20% | ≥ 65% | ≥ 85% |
| 13 | ≥ 50% | ≥ 85% | ≥ 90% |
To read the table, go across a row. A MERV 8 filter isn't scored at all on the smallest band. MERV 11 has to catch at least a fifth of those particles, and MERV 13 has to catch at least half. EPA makes the same point: filters rated MERV 13 and up must show at least 50% removal of the smallest particles tested.[1]
MERV 10 is in the table because some manufacturer media cabinets, like Carrier's EZ Flex, ship at MERV 10.[3]
Can my system handle MERV 13?
EPA's answer is that most furnaces and HVAC systems can take a MERV 13 filter without equipment problems, as long as it's replaced often. It also says this is hard to tell from the equipment, because HVAC systems usually aren't labeled with filter recommendations, and that a technician can confirm it.[1]
What actually matters is resistance to airflow, called pressure drop and measured in inches of water column (in. w.c.). Carrier's furnace manual says filter systems are best kept under 0.2 in. w.c., and that blower efficiency and airflow are best under 0.1 in. w.c.[4]
Real numbers: one Carrier cabinet at MERV 10 vs MERV 13
Carrier publishes clean pressure drop for its EZ Flex media cabinet at both ratings, which gives a fair like-for-like comparison:
| Airflow (CFM) | 16-in. MERV 10 | 16-in. MERV 13 | 20-in. MERV 10 | 20-in. MERV 13 |
|---|---|---|---|---|
| 800 | 0.07 | 0.09 | 0.05 | 0.07 |
| 1,200 | 0.13 | 0.17 | 0.09 | 0.13 |
| 1,600 | 0.21 | 0.27 | 0.14 | 0.20 |
There are two takeaways. At the same airflow, the MERV 13 version has more resistance. But the bigger 20-inch MERV 13 cabinet has about the same resistance as the smaller 16-inch MERV 10 one. A larger or deeper filter can make up for a higher rating. This is one product's data, and other filters will differ.
Things that matter as much as the number
- Fit. EPA says the filter should fit snugly, so air doesn't leak around it, and you shouldn't have to bend or crush it to get it in.[1] Size guides: find your size and measure your slot.
- Run time. A furnace filter only cleans air while the system is running. EPA notes that's usually less than 25% of the time during heating and cooling seasons.[1]
- Replacement. EPA says to follow the manufacturer, and that manufacturers typically recommend changing every 60 to 90 days, sooner if the filter looks heavily soiled.[1]
- Other rating scales. Store brands may use FPR or MPR instead of MERV. EPA notes those two scales are proprietary, while MERV is based on a national consensus standard.[1]
About health claims: we don't make any. For what filtration can and can't do for indoor air, read EPA's Guide to Air Cleaners in the Home. EPA also states that it does not certify or recommend specific filter brands.[1]
Last checked 2026-11-18 against the documents listed under Sources.
Sources
Every number above links to the document it came from. We re-open each one and record the date in our source log.
- Guide to Air Cleaners in the Home, U.S. Environmental Protection Agency (Furnace and HVAC system filters; Q&A: HVAC System Filters and Furnace Filters; Q&A: How do I know if my system can accommodate a MERV 13 filter or higher?; Q&A: How can I tell if the filter is the right size?; Q&A: How often do I need to change my filter?; Q&A: How are HVAC/furnace filters rated?; Disclaimer). Last checked 2026-11-18.
- What is a MERV rating?, U.S. Environmental Protection Agency (MERV table; MERV rating table). Last checked 2026-11-18.
- EZXCABCR EZ Flex Expandable Air Filter with Cabinet, Product Data (Catalog No. EZXCABCR-03PD, edition 09/21), Carrier (p. 1, Features/Benefits; Features/Benefits; p. 3, Pressure Drop at Various Airflows (Clean)). Last checked 2026-11-18.
- 59SC2D Single-Stage 4-Way Multipoise Condensing Gas Furnace, Installation, Start-up, Operating and Service and Maintenance Instructions (Catalog No. 59SC2D-04SI, edition 12/25), Carrier (p. 19, Filter and Return Duct Sizing). Last checked 2026-11-18.